Shop Alarm Controls | Brands We Sell

The Alarm Controls 1200 magnetic lock can be used with any access control system because it has built-in arc suppression. This variant has 1200 lbs of holding force when used with single or double doors to secure interior and shielded perimeter doors.

The Alarm Controls TS-2T is a momentary “PUSH TO EXIT” action switch for security and access control environments. Pressing the green button triggers a 2-45 second timer that will automatically reset if the button is pressed again before the timer subsides. The TS-2T is mounted to a single gang stainless steel wallplate. The TS-2T request to depart station, which comes with an electronic timer and a square push button, offers a practical option to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The Alarm Controls TS-2T is a momentary “PUSH TO EXIT” action switch for security and access control environments. Pressing the green button triggers a 2-45 second timer that will automatically reset if the button is pressed again before the timer subsides. The TS-2T is mounted to a single gang stainless steel wallplate. The TS-2T request to depart station, which comes with an electronic timer and a square push button, offers a practical option to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The Alarm Controls AM3370 is a three piece Z bracket for 600 series single magnetic locks. The bracket has a clear anodized aluminum finish. For use on all single Magnetic 600 series locks from Alarm Controls Corporation, three (3) piece “Z” brackets. For use with in-swing doors, use the AM3370 Z bracket.

The Alarm Controls TS-14 is a request to exit green button with a momentary action switch and pneumatic time delay. The unit contans one normally-open and one normally-closed contact and has an adjustable time range of 2 seconds to 60 seconds. The station does not require power for timing function. The unit is on a single-gang faceplate. The TS-14 request to depart station, which has a push button and a pneumatic timer, offers a practical solution to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

Built to provide 1200 lbs of holding force, per door, for double door configurations, this easy to install magnetic lock includes LED status indicator, bond sensor and door status sensor to signal a powered and securely locked door. Ideal for interior or exterior applications.

The receiver can accept a maximum of 30 transmitters, and it is outfitted with an LED status indicator. The receiver also features a built-in five second relay on release and a cover designed to hide screw terminals for a clean installation.

With the use of a single device, wireless remote transmitters enable access control for up to three doors. The best choice for front desk/reception applications or challenging to wire settings. Built to operate with keypads, electric strikes, magnetic locks, gate operators, and door operators. Channel receiver, transmitter, mount, and keychain are all included in the kits.

The Alarm Controls 600WP is a weatherproof magnetic lock with a minimum holding force of 600 lbs. The lock is ideal for sliding and swinging gates.

For perimeter applications, a magnetic gate lock with 600 lbs of holding power offers weather-resistant entry control. perfect for swinging or sliding gates.