Shop CARTELL | Brands We Sell

Add wireless vehicle detection to existing security/home automation systems, connecting to their cameras, sounders, etc. Also, seamlessly connect to any electric gate operator for free exit, whether residential or commercial.
The integrator (CW-INT) provides a two second relay closure to activate the home automation system or electric gate operator. For solar gate application, must have 20W panels or higher with deep cycle batteries.

Cartell’s alarm sounder for the CW-CON wireless driveway system pairs effortlessly with the CW-SEN wireless sensor and has 30 sounds to choose from, all in a compact design.

Always know people have driven up before they knock on your door

The CW-REP Repeater is for use with the CW-SYS Wireless Driveway System and is designed to turn an additional integrator into a radio repeater, greatly extending the radio range and detection ability. Simply install in the integrator in the home in between the sensor puck and where the existing integrator is already connected to the home automation system or gate opener, and the range will be vastly extended, allowing you to be notified of any vehicle entering or exiting the access point.

Purchase additional sensor pucks for multiple property entrances. This is a self-contained unit with sensor, transmitter, and antenna inside. It installs in under 1 hour (on average) without the need for trenching, and can be installed above ground on an immovable object, in the ground, or in a driveway. Easily pair a sensor with an infinite number of Sounders.

Dual timed relay output with 15 amp floodlight circuit. CF-2C Driveguard Ultra (Metal Case, Circuit Board, Photocell and Power Supply)

The CT-A1 Sounder is an indoor sounder that installs in a single-gang electric box. Works with DriveGuard and DriveGuard Ultra systems (which use CT-2B and CF-2C control units respectively). 3 Tone types: Steady, fast-pulse, and slow-pulse.

The CT-2B’s sensor is buried beside and near the end of the driveway, hidden and vandal-proof. It only detects moving steel, eliminating false alarms caused by animals or blowing objects. Its control unit is installed in a basement or closet and its sounders fit in a light switch box.

SELF-CONTAINED FREE EXIT SYSTEM WITH LOW STANDBY CURRENT

CT-6 Sensor Probe has a custom length of direct burial cable attached at the factory . Attached cable comes in increments of 50’, from 100’ to 500’; cut in increments of 100’, from 500’ to 3000’ . Direct burial cable makes conduit unnecessary . Cable is polyurethane coated, making splicing in the field possible .