Shop ELK PRODUCTS, INC | Brands We Sell

Double Sided Mounting Tape with an aggressive pressure sensitive permanent adhesive on both sides. Package contains an assortment of three (3) thicknesses; 1/16”, 1/8”, and 1/4”. This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular surfaces.

Self-Contained Siren
Two Tones, Yelp & Steady

Navigator is a stylish new Touch Screen Keypad for use with the M1 Control System. It features a touch sensitive 3.5” LCD Color display with bright, easy to use graphic icons and softkeys. Connection to M1 panel is via the RS485 bus, making it simple for new or retrofit installations. Not only is Navigator stylish, but it also makes the M1 Control System extremely easy to operate.

The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can report abnormal conditions back to an ELKM1 Control over the RS485 four (4) wire data bus. It also features relay outputs for AC and Low Battery to allow “stand-alone” operation with other Controls (Security, Access, CCTV products, etc.). Power from the P212S can be used to increase the capacity of a control, or to remotely power devices such as motion detectors, keypads, zone expanders, sirens, annunciators, etc.

The M1XRFTWM two-way wireless transceivers allow an ELK-M1 or ELK-M1EZ8 control to accept Elk’s complete line of two-way wireless sensors. The ELK-M1XRFTWM has been optimized to provide superior signal reception and reliability in multi-transceiver applications.
The ELK-M1XRFTW has been replaced by the ELK-M1XRFTWM. The ELK-M1XRFTWM performs all the functions of the ELK-M1XRFTW and is suitable for single or multiple transceiver installations.
Do NOT mix ELK-M1XRFTW and ELK-M1XRFTWM transceivers in a single M1 installation.

Multi-purpose Interior Surface Mount Speaker
Great for voice and sounds

The ELK-6052 Wireless Smoke & Heat Detector is designed for use with Elk’s two-way wireless product line consisting of the ELK-M1XRFTWM Transceiver and the ELK-M1 Control. It is intended for residential applications and incorporates many features designed to ensure its reliable performance.
This smoke detector provides a two-way solution with built-in sounder and wireless “Sound All” activation during an alarm. The unit utilizes photoelectric smoke detection technology, and includes fixed temperature 135°F heat detection, and rapid “rate-of-rise” temperature detection. Built-in self-diagnostics monitor sensitivity and operation status.

ELK’s 150RT siren provides a rugged quality, tamper and corrosion resistant enclosure perfect for all jobs. With a compact design and stainless steel construction, these sirens naturally reflect the mounting surface, blending easily into the surroundings. Great for harsh environments.

The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, “No Rust” enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The stainless steel naturally reflects the mounting surface and blends easily with any residential or commercial building.

The ELK-BLT Battery Life Tester or .Mhos Meter. is a compact, easy to use service tool for testing 12 Volt rechargeable batteries. The BLT measures internal conductivity (Mhos), which is the best indicator of a battery’s health and life expectancy. Mhos happens to be the inverse of Ohms (conductance as opposed to resistance). The BLT operates as follows: For each battery brand and size installed you should start by measuring and recording a .baseline. Mhos reading. Then, during any service call or inspection simply measure and record the current (most recent) Mhos reading. Always compare the current Mhos reading with the original reading.