Shop ELK PRODUCTS, INC | Brands We Sell

The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4” drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk’s Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life. It works with Wireless Transceivers and Controls that accept Elk’s two-way technology; such as, the ELK-M1XRFTWM. Each time the 6023 transmits it sends a unique TXID identifier and a Loop number.

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply.
In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent “deep discharging” of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.

The ELK-319HRR is a supervised, wireless heat sensor. It uses a solid-state thermistor to sample and trigger an event at a selectable setpoint of either 135 or 200 degrees F. It can also trigger an event if the temperature rises 12 degrees F or more during a one (1) minute time period. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency.

The ELK-6053 Wireless Heat Detector is designed for use with Elk’s two-way wireless product line consisting of the ELK-M1XRFTWM Transceiver and the ELK-M1 Control. It is intended for residential applications and incorporates many features designed to ensure its reliable performance.
This heat detector provides a two-way solution with built-in sounder and wireless “Sound All” activation during an alarm. The unit provides fixed temperature 135°F heat detection, and rapid “rate-of-rise” temperature detection. Built-in self-diagnostics monitor sensitivity and operation status.

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings. The ELK-950 is compact and easy to install and features high quality, clearly labeled screw terminals, 8 pin modular phone connector, built-in tamper loop, and automatic shorting pins for cord removal.

M1 Gold Control Board Only
TERMINAL BLOCKS NOT INCLUDED
M1 Gold Security and Automation Controls provide the ideal combination of security, energy management, and integrated control solutions. M1 provides rock solid security and life safety with comprehensive detection and state-of-the-art reporting capabilities. It features a fast microprocessor for enhanced speed, capability and security. A onsite voice alerts provide system status information to alleviate user intimidation. Event notifications can be provide via phone call, email, or text message.
M1 Gold is very flexible and scalable with possibilities for expansion, wireless sensors, IP/Cellular reporting, and secure connectivity for remote control.
M1 Gold offers the flexibility to integrate a vast network of industry partners for integration with lighting controls, thermostats, touch screens, and more. This integration combined with our powerful and easy programmable provides an intelligent automation platform for a truly cust

The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4” drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk’s Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life. It works with Wireless Transceivers and Controls that accept Elk’s two-way technology; such as, the ELK-M1XRFTWM. Each time the 6023 transmits it sends a unique TXID identifier and a Loop number.

The ELK-M1XRF319 is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points).
The M1XRFEG receiver is a dual (2) antenna, phase diversity design capable of long range wireless coverage. It is compatible with ELK’s 319 Series Wireless Sensors, as well as other 319.5MHz sensors (Interlogix format).

The ELK-P624 is a general purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic resetting “fuseless” overload protection means never having to return to a job site to replace a blown fuse.
On-board diagnostic LEDs indicate the presence of the AC charging and DC output voltages. The output voltage can be set with a mini-jumper.

The ELK-6021 is an exceptionally thin Wireless Window Sensor. It is designed primarily for use on non-metal surfaces and is ideal for double hung or casement style wood/vinyl windows. It is nearly invisible when installed properly. The 6021 is compatible with Wireless Transceivers and Controls that accept Elk’s two-way technology such as the ELK-M1XRFTWM. The 6021 contains a built-in reed switch and reports a unique TXID identifier to the transceiver.
The 6021 features Elk’s Industry Leading Two-Way Technology with positive signal acknowledgment and very good battery life.