Shop ELK PRODUCTS, INC | Brands We Sell

This universal sensor has 1 built-in reed switch plus 2 external zone inputs (open or closed circuit) which allows it to secure up to 3 doors, windows, etc. It also features Elk’s industry leading two-way technology.

The ELK-960 Delay Timer is designed to be an economical and flexible solution for any general-purpose timer application. The unit can be configured for use on 12 to 24V systems, with positive or negative trigger logic. Positive triggers can be as low as 4.5V. Setup is quick and easy with thumbwheel adjustment between 1 and 60 seconds. A quick jumper setting converts the time from seconds to minutes. The Timer can be configured to activate once for each trigger, or free-run as soon as power is applied. Relay can be configured to be normally on or normally off.

The small size of this self-contained exterior siren makes it perfect for tight spaces. Rivals sound output of larger units and features low current draw. This 12 VDC siren generates a sound level of 110 dB at 1 meter. Featuring Yelp or Steady Siren tones, the ELK-M120 is pre-wired for easy installation. Backed by a lifetime limited warranty.

The ELK-6011 is a Wireless Two-Way Panic Sensor with stylish new look and replaceable battery! It features a single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm. The 6011 is compatible with Wireless Transceivers that utilize Elk’s ‘RFTW’ two-way technology; such as, the ELK-M1XRFTWM. Each time the button is pressed and held the 6011 sends a unique TXID identifier to the transceiver and then listens for an acknowledgement.

The 6011 features Elk’s Industry Leading Two-Way Technology, capable of on-demand status updates as well as extended range and long battery life.

Intended to be used in residential and light commercial installations, the PIR incorporates advanced features designed to ensure reliability, ease of installation, and provide innovative security enhancements.
To simplify installation, ELK’s Wireless PIR Motion Sensor allows the installer to remotely enable/disable Walk Test Mode from a keypad. Until now, the industry has accepted the process of manually tripping a switch on a one-way wireless PIR to enter walk test mode. The bright high-intensity white LED convenience/security light clearly identifies when the sensor is detecting motion.

Retrofitting keypads an other system interfaces can be frustrating, especially when it requires patching a wall. The ELK-CPL Universal Cover Plate solves this problem for faster installations and a clean finished look.

This package includes:

• M1 Gold Control Board
• M1KP LCD Keypad
• SWB14 Enclosure
• 1280 8Ah Battery
• TRG1640 AC Transformer
• 73 Echo™ Paintable Interior Speaker
• 952 In-line Telephone Surge Protector
• RJSET Telco Jack & Cord

The ELK-45 is a loud self-contained electronic siren in a compact and attractive housing. This siren draws less current than many competitive units and features the ability to produce two distinct sounds from a single input trigger. The ComboTrigger™ option allows controls which have a single alarm output and pulsing option to activate both the burglar and fire alarm sounds.

A single door access interface module for use on the M1 and M1EZ8 Control Panels. The M1KAM connects to the 4 wire keypad data bus in place of a traditional M1 Keypad. Since the maximum number of keypads on an M1 or M1EZ8 is 16, the maximum number of M1KAM modules (and controlled doors) is 16, minus any installed keypads. Even though an M1 Keypad can accept a 26 bit access reader, the M1KAM is a more powerful and less expensive access solution. For example; the M1KAM includes a relay (door unlock) output with form “C” dry contacts, making it compatible with most door lock devices regardless of the voltage rating and style (AC or DC).