Shop ERICO | Brands We Sell

Spring steel beam clamp for 1/4 and 3/8 inch threaded rod. Clamp has a static load of 100 pounds.

CADDY® Galvanized finish on J-Hooks provide smoother cable pull and greater corrosion resistance.

Easy to install heavy duty electrical box hanger for acoustical ceiling applications. Adjustable for 1 1/2” and 2 1/8” boxes, hardware included.

CADDY® CABLECAT 3/4 in. dia. J-hook assembled to 4Z34. For No. 12 thru 1/4 in. wire, plain or threaded rod and 1/8 thru 3/8 in. flange.

FEATURES:

• Provides positive support with locking screws
• Makes wire “fishing” easier
• Install with a drywall saw and screwdriver
• Eliminates the need for an electrical box when installing low voltage Class 2 wiring
• For low voltage Class 2 use only.

SPECIFICATIONS:

• Material: Steel
• Finish: Plain
• Gang: 1
• Drywall Thickness: 1/2” – 1 1/4”
• Height: 4 1/4”
• Width: 2 1/2”
• A: 2 3/8”

FEATURES:

• Combine bridle rings with other nVent CADDY fasteners to support cables from flange, purlin, drop wire, t-grid, etc.
• Material: Steel
• Finish: Electrogalvanized
• Diameter: 1 1/4”
• Screw Diameter: 10”
• Screw Type: Metal
• Screw Length: 1/2”
• Ultimate Static Load: 50lb

J-Hooks have a wide base design and smooth beveled edges to provide a large bending radius for current and future high-performance data cables and fibre optics. nVent CADDY Cat HP J-Hooks are available in a wide range of sizes to offer a solution that meets industry standards for Cat 6A and easily accommodates Cat 7, large-diameter fibre optic, innerduct and coax cable. Individual nVent CADDY Cat HP J-Hooks can be fastened directly to the building structure or can be used to expand existing nVent CADDY Cat HP J-Hook cable supports. The J-Hooks are designed to provide a strong and stable pathway support installation.

The TSGB Telescopic Screw Gun Bracket for the installation of pipe and tube runs between studs offers a unique, one-piece, break-apart design that makes mounting easier than ever. Requiring only a screw gun for installation (ERICO® recommends low-profile screw CADDY® Part No. SMS8), the TSGB is adjustable to allow non- standard stud spacing and features interlocking tabs for convenient identification and bending. The TSGB16 works with stud spacing from 11 to 18 inches, and the TSGB24 works with stud spacing from 17 to 26 inches. Both versions of the TSGB are notched and marked for easy identification and bending at 1-1/2 inch and 2-1/8 inch depths.

FEATURES:

• No sharp metal edges with plastic design
• Fast, easy way to install
• No installation tools required to secure bracket in the drywall opening
• Serrated interlocking system secures tightly
• Template points on brackets help eliminate multiple measurement markings during installation
• Recessed design helps assure flush mount of device
• Eliminates the need for electrical boxes on low voltage class 2 applications

Combine bridle rings with other CADDY fasteners to support cables from flange, purlin, drop wire, t-grid, etc. Efficient means of low voltage and data cable support in combination with several CADDY fasteners to most any structural element. EG w/ 1/2” threaded screw. 2” diameter, 1/4”-20 thread.Efficient means of low voltage and data cable support in combination with several CADDY fasteners to most any structural element. EG w/ 1/2” threaded screw. 2” diameter, 1/4”-20 thread.Efficient means of low voltage and data cable support in combination with several CADDY fasteners to most any structural element. EG w/ 1/2” threaded screw. 2” diameter, 1/4”-20 thread.
When combined with other CADDY Fasteners, Bridle Rings can be located on:

• “C” Purlins – VF144TI.
• “Z” Purlins – 1224TI or AF144TI
• Acoustical T-Grid – ATS4I or ATA4I
• Beam Flanges up to 3/4” – 2FMP28, BC, BC200, M912
• Concrete – 4TIB
• Drop Wire – 4Z34 – 6Z34