Shop KERI SYSTEMS INC. | Brands We Sell

Keris PKT-10X Proximity Key Ring Tag provides user convenience in a small, ergonomic, and extremely durable package. The tag is equipped with a brass eyelet for attachment to a key ring that ensures the neck of the tag will not break during the life of the system. Key Tags are especially convenient for building entrances where the user still has their car keys in hand. If the system has many interior doors that are secured with a Keri access control system, users often attach the tag to a lanyard for easy carrying, especially if the clothing does not have pockets. If parking gates are secured by an access control system, a Keri Proximity Card is recommended because the tag is usually hanging with the keys in the ignition.

Keris NXT-K Proximity Key Ring Tag provides user convenience in a small, ergonomic, and extremely durable package. The tag is equipped with a brass eyelet for attachment to a key ring that ensures the neck of the tag will not break during the life of the system. Key tags are especially convenient for building entrances where the user still has their car keys in hand. If the system has many interior doors that are secured with a Keri access control system, users often attach the tag to a necklace for easy carrying, especially if the clothing does not have pockets.

Custom programming is available, subject to minimum order quantities and factory lead times.

Keri’s KPS-3 Power Supply provides an open frame power solution with an ultra compact footprint, providing your design with more space and efficiency. The Power Supply provides 12VDC @ 2.8A and has a 1.5A battery charging circuit. The supply has a perforated cover (for cooling) mounted in standard Keri enclosure (no enclosure option available). It works with the PXL-500, NXT, and NXT-MSC controllers. It supports a direct 100 VAC to 240 VAC input at 50 Hz and 60 Hz, no transformer required.

Smallest NXT Series Reader – Measuring just 3.75 inches high by 1.60 inches wide by .625 inches deep (9.5 cm high x 4.1 cm wide x 1.6 cm deep), the NXT-3R is one of the smallest proximity readers on the market. It is designed to mount directly on metal or a wall with out mounting brackets or spacers.

NXT Readers can be ordered as “Entrance” or “Exit” readers when used with NXT Controllers (Mercury-Powered versions), which doubles the controller’s reader capacity. For “Exit” readers, specify model numbers with an E at end of model number (i.e., NXT-3RE). They can now be configured to read certain HID 125 KHz cards and tags such as the HID ® Prox II Credentials, thus providing all of the benefits listed above and eliminating the need for an NXT-WI or NXT-RM3 Reader Interface Board.

Keri Systems has partnered with Mercury Security to bring enhanced capabilities to its doors.NET customers that use the NXT hardware platform of TCP/IP-based controllers. By embedding Mercury Firmware in NXT Controllers a whole new set of features become available for applications with more sophisticated and customized requirements. This broadens the scope of NXT hardware capability such that it makes it a good choice for high-end and Enterprise applications as well as mid-sized projects that demand high end features.

The NXT-MSC controller has all of the hardware advantages the Standard NXT controller has. By using an existing TCP/IP network, controller cabling costs can be eliminated. Or, if building a new network, they can be reduced up to 50% over traditional hard-wired access systems by using inexpensive, CAT-5 cable. The NXT-MSC 2D/4D is designed to be extremely intelligent with little reliance on network traffic for decision making, allowing it to be thrifty with any network’s

Keri’s PXL-500 Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture allows Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri’s doors.NET software.

The Keri Systems KC-10X-50 is a 50-pack of standard, light proximity cards for use in access control systems. These proximity cards fit comfortably in a wallet or purse, but can also be worn on clothing or as a necklace clip. The cards are extremely durable and boast an excellent read range relative to their size. All cards features a vertical slot punch.

If you wish to purchase individual cards, take a look at the KC-10X.

The Keri Systems NXT-2D-MSC has Mercury Firmware with 2 Doors/4 Readers. The NXT-2D Controller is designed for IT. Using a TCP/IP network eliminates controller cabling expenditures. Using affordable CAT-5 cable may lower network costs by up to 50% compared to standard hard-wired systems. The NXT-2D is incredibly clever and relies little on network traffic for decision making, saving important network capacity. Keri’s patented MAC addressing method provides reliable device detection and one-button autoconfiguration. Up to two 4X4 Input/Output boards (NXT-4X4) may be attached to the controller’s RS-485 trunks to increase system versatility (buses). Customers may pick between Keri’s 4-wire NXT Series Proximity Readers with reader supervision and In/Out reading (4 Readers), or any reader with a standard Wiegand output or MS Series Proximity Readers using the NXT-RM3 Reader Interface Module. doors.NET software offers a similar appearance and feel to Keri’s original DoorsTM program, but with

The smallest MicroStar Reader
3.4” x 1.4” x 0.38” (86 mm x 36 mm x 10 mm) with a read range of up to 4” (10 cm). Lifetime warranty.
Keri’s MS Series Proximity Readers are designed to blend aesthetics, read range performance, and small package size with an extremely thin profile into a product that is priced significantly less than competing proximity readers. The readers are for use exclusively with Keri’s access control system based on the PXL-500 Tiger Controller and can be used with the NXT-2D/-4D and MSC-2D/4D Controllers when using a Interface Module, to save cost and continue the use existing credentials when upgrading to the newer NXT controllers.

The Keri Systems NXT-RM3 Reader Interface Module is designed to make it easy to connect reader technologies with industry standard Wiegand output to NXT Controllers. It also allows connection of Keri MS Series Proximity Readers, most commonly used for legacy systems where PXL-500 Controllers are also in place being used with KC-10X, MT-10X, or PKT-10X credentials.

The NXT-RM3 securely plugs directly onto an NXT Controller or an NXT-4X4 or GIOX I/O Expansion Module with excellent mechanical and electrical integrity. The option to bring the reader terminations to the I/O modules provides substantial savings in wiring costs because door functions can be located closer to the reader/door, with only 4 wires required to be cabled to centrally located controllers.