Shop LINEAR | Brands We Sell

The Model TE5D Transformer Assembly is a ETL Listed, dual-output 16-volt AC, 37 VA direct wire transformer used for powering the Model dmc1 and dmc3-4 Music/Communications Systems. The transformer mounts in the bottom of Model dmc1H or dmc1HC Wall Housings.
The transformer output wires are terminated with a connector that fits the dmc1 or dmc3-4 master.

The Model ACT-31DHC is 1-Channel Custom Block Coded Key Ring TRANS PROX Transmitter & 26-bit Wiegand HID Compatible Proximity Tag is designed for use with Nice/Linear’s access control products.

The Model ACT-31DHC is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

eMerge Elite-36 4-door system, supports up to 20,000 cardholders with up to 80,000 cards, up to 8 readers, browser-based management via embedded Web server, upgradable up to 36 doors and 72 readers with license keys and expansion nodes, easy setup wizard, optional PoE power with E3-POE module, housed in a compact plastic enclosure with integrated tamper switch.

The Model 302850 2-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver’s Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.
The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

Two button, two channel, 9 volt battery transmitter with removable visor clip, each button can send any of the 1024 selectable codes, 300MHz

The ruggedized R style 212R keypad features a cast aluminum housing and all-metal faceplate that has been treated with polyurethane to increase its protection from corrosion. The ruggedized keypad uses all metal Braille, alpha-numeric keys. There is also an internal sounder that is used to indicate key press feedback. The ruggedized keypad’s housing can be mounted to a variety of surfaces. Suggested mounting includes; gate goosenecks, post, concrete walls, etc. Additional tamper resistance is provided with the onboard tamper loop that can be used to indicate the removal of the faceplate.