Shop NAPCO SECURITY TECH | Brands We Sell

ISEC-GLASSBREAK Wireless Acoustic Glassbreak Detector ISEC-SMOKE Wireless Smoke Detector

NAPCO Commercial UL Wireless Peripherals for GEMC and Firewolf Systems

45 × 45 feet range
20 lb pet/animal Immunity
Room-temp alert ™ temperature monitoring provides auto-alert at 40F – 90 F
Look-down/creep zone
D.C.I.D. Technology – detect & compare imaging diagnostics for advanced false and true alarm detection
Active self test mode
Exceptional RFI-/EMI/lightning shielding of key components
Lens bank available, including long range, barrier, and specialty ranges
Wall or corner mountable
Tamper supervised
Form A relay

Power limited output to the StarLink communicator PC board 12V input terminals
Battery connection red and black flying leads
Monitored battery charging and Active battery test circuits
StarLink communicator trouble input (from StarLink communicator PC board PGM1 terminal to detect StarLink communicator trouble)
Requires a sealed lead acid min 4AH / max 7AH battery for minimum 24-hour standby time (max charge current 200mA)
Trouble relay output (C, N/O and N/C terminals) to wire to a panel zone dedicated to “CAT-M1 Trouble” (dry contacts). Remove jumper “J2” to isolate common from ground
Green AC ON LED visible from the exterior housing

ISEC-WL-SIREN Additional Plug-in Siren w/ StrobeFor more alarm sounding throughout premises, up to 4 optional wireless sirens can be used in addi-tion to the one built-into the Go-Anywhere Hub
Plug into AC or optional battery operation
(wall-mount)
85dB at 10’, UL-Rated
Supports Siren, Temporal Fire and CO alarm audi-ble cadences
Integral bright LED strobe w/ diff. pattern for burg or fire
Operable from 110VAC with battery-backup or Batteries-only
Battery-only operation with 4 standard Alkane
C cell batteries up to 3 years typ.
Supervises battery, and detects and notifies low battery condition
Optional Tamper magnet-activated switch
Indoor or outdoor operation
Supports OTA firmware updates

Universal Alarm Communicator; IP and/or Cellular Alarm Dual Reporting
Full Support for Growing List of Major Panels & Brands
Full Virtual Keypad Smart App, Mirrors the Real Keypad on the Wall
Notifications Full Bus-Based SMS/MMS Powered by iBridge
Z-Hub Option adds Z-Wave Device Control for Connected Home/Biz & Scenes

The SLE-ANTEXT-ISO can be used for new or existing installations to eliminate the possibility of ground fault system troubles in Commercial Fire applications. Use the four holes in the mounting surface to secure the SLE-ANTEXT-ISO, then secure the L-bracket to the SLE-ANTEXT-ISO with the four supplied screws (½” Phillips pan head). If needed, eight screw holes are available for securing the SLE-ANTEXT-ISO to the mounting surface

Napco ISEC-MOTION Wireless motion sensor, 50 × 50’ broad coverage, fully-shielded PIR circuitry, battery-saver feature and long-life lithium-battery powered (supplied)