Shop SAFETY TECHNOLOGY | Brands We Sell

STI-1100 consists of a clear, tamperproof, super tough polycarbonate cover, frame and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

STI-1130 consists of a clear, tamperproof, super tough polycarbonate cover, frame, spacer and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

This protective cover has been helping to stop false fire alarms around the world for more than 40 years, without restricting legitimate alarms. All models offer excellent protection against physical damage (both accidental and intentional) and several against severe environments both inside and out. It is ideal for schools, colleges, hospitals, nursing homes, stores, hotels and public buildings of almost every kind where there is a threat of false alarms.

STI-1230 consists of a clear, tamperproof, super tough polycarbonate cover, frame and spacer that fits over most manual pull stations. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame until the cover is snapped back onto the frame.

Protects against vandalism, accidental damage, dust and grime and severe environments inside and outside. Protects pull stations, keypads, intercom stations, emergency buttons, electrical light switches or duplex plugs. ADA Compliant. Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).

These covers are ideal for protecting a wide range of devices, components and sensitive units from vandalism and accidental damage as well as weather, dirt, dust and grime. Covers are designed to keep the enclosure at a temperature above freezing which allows the protected unit to be installed outdoors, in freezers, unheated warehouses or storage units. The radiant heat plate prevents LCD from becoming sluggish or freezing and operates on 12, 16.5 or 24 VAC/VDC.

Universal Button offers over 300 different combinations for the price of a standard one configuration button. The faceplate is constructed of cast aluminum metal, allowing it to take tough knocks in stride, and is slightly oversized to cover old plate installation marks. Button package includes: faceplate, three illuminated push buttons, five changeable button messages and ten changeable illuminated activation messages.

Here are excellent ways to protect strobe units against both vandalism and accidental damage. Constructed of tough, 9-gauge steel wire coated with corrosion resistant polyester, these guards can take hard knocks in stride. Wire guards provide maximum protection for System Sensor SpectrAlert Advance series strobe notification appliances.

Here are excellent ways to protect strobe units against both vandalism and accidental
damage. Constructed of tough, 9-gauge steel wire coated with corrosion resistant red polyester, these guards can take hard knocks in stride. STI-9708 wire guards provide maximum protection for System Sensor SpectrAlert Advance series strobe notification appliances.

The pneumatic button has a mechanical adjustable timer which opens or closes a circuit and has a timed delay before reset. It does not require power for timing operation and has a mechanical timer life of over 1,000,000 operations. When local code or authority requires a pneumatic button be used, this device solves the problem.

The UB-1PN offers many different combinations for the price of a standard one configuration button. The faceplate is constructed of cast aluminum metal, allowing it to take tough knocks in stride, and is slightly oversized to cover old plate installation marks. Button package includes: faceplate, three push buttons, five button messages and seven changeable illuminated activation messages.