Shop SECURITRON MAGNALOCK CORP | Brands We Sell

The Securitron M32 electromagnetic Lock is ideal for traffic Control in high-use areas within secured or monitored perimeters. With unsurpassed durability, the Securitron M32 will last long after most buildings wear out. Applications include storage areas, rooms, and hallways where reliability, high durability and low-maintenance are required.

The Securitron TSB-CXL is a 36” door cord with Gray/Black caps used for power and data transfer between a door frame and door. The cord is made from armored stainless steel but is flexible enough to adapt to different door installation sites.

Securitron’s “ZA” bracket has been designed to allow a full range of adjustability while maintaining a high level of strength. Its versatile adjustment provides increased adaptability to the wide variety of installation configurations encountered when installing an “F” Series (Face Mounted) Magnalock on an inswinging door.

The Securitron AQD6 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 6 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

The Securitron AQD4 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 4 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

The AQDX series are heavy-duty, self-contained, efficient, clean, offline Switching power supplies, with linear-type performance, and are jumper selectable between 12 VDC at 6A and 24 VDC at 6A. The AQDX series have a dedicated lead acid battery(s) charger that obtains maximum battery life while providing 12 VDC or 24 VDC uninterruptible power for access Control security systems. The field selectable AC input on AQD2, 4, and 6 models allows these power supplies to be powered anywhere in the world. The AQDX series have exceptional brownout capability with operation down to 85% of nominal voltage. The AQDX series have an extensive filtering system that provides linear output performance, and they are electronically protected against battery reversal, shorting, or overloading. All variants are Power limited output with thermal protection, AQD6 is power limited only when used with a Distribution board. Each of these protective features will self-restore.

Unique hybrid design, with two tons of holding power. The hybrid design of this magnetic electromechanical Lock includes two springloaded, hardened steel jaws that deliver up to 4,000 lbs of ultimate holding power. In a forced-entry assault, the jaws of the MM15 MEMLock clamp down on the armature plate and hold firm, for an unmatched level of access Control.

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000 lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding vehicle, pedestrian, or stock gate access control.