Search Results

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

L-Series strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.

Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.

The System Sensor LENS-G2 is a green lens that can be used for any indoor wall-mountable strobe. L-Series color lenses come in four colors options including amber, blue, green and red. The lenses are compatible with L-Series strobes including wall or ceiling mount. Note that color lenses must only be used with devices that are not fire printed.

SpectrAlert® Advance color lens LENSRC attachments are easy to install to any indoor or outdoor SpectrAlert® Advance strobe devices to provide distinctive visual signaling. These lens attachments come in four color options (amber, blue, green, and red) for mass notification, severe weather, emergency response, and other non-fire applications. The lenses easily attach to any non-fire printed SpectrAlert Advance strobes, including horn strobes, speaker strobes, and strobe only devices. Each lens ships with a clear adhesive on the bottom surface. The lens is then aligned with the clear strobe and applied.

The System Sensor P2GWL is a white wall mount compact horn strobe. This 2-wire unit features FIRE written in white and a clear lens. The L-Series line of wall horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the backbox, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.

SpectrAlert® Advance horn strobes include a variety of features that increase application flexibility and simplify installation.

The L-Series Surface Mount Back Boxes are designed to fit System Sensor L-Series devices. They provide a hard surface mounting option for surfaces such as concrete and brick. Models are available in wall and ceiling mounting formats, red and white color options and by device type. The L-Series Surface Mount Back Boxes include a grounding plate and grounding screw for electrical grounding and threaded knockout holes for ¾ inch conduit adapters.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

ST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.