Search Results

The System Sensor L-Series and L-Series with LED Outdoor platform offers the most versatile and easy-to-use line in the industry with lower current draw and modern aesthetics. LED lighting technology offers significantly lower current draw compared to older Xenon bulbs across a full candela range. This improves design flexibility for notification appliance circuits (NACs) while also reducing power supply requirements allowing for simpler and lower cost installations. L-Series with LED can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from -40°F to 151°F.

Replacement carbon monoxide (CO) sensors for the i4 Series COSMO-2W 2-wire and COSMO-4W 4-wire combination CO and photoelectric smoke detectors

The System Sensor SS-Series intelligent thermal detectors with integral communication provide point location for alarm communication and selective maintenance. SS-Series detectors support current SK, LiteSpeed™ and SS Protocol systems. Refer to the Addressable Detector and Sounder Base Compatibility Chart or the Intelligent Control Panel SLC Wiring Manual for specific panel compatibility. SS-Series thermal detectors provide cost-effective, intelligent property protection with a UL 521 listing. Fixed temperature thermal detectors offers 135°F (57°C) fixed thermal detection.
Detector sensitivity is continually monitored and reported to the fire alarm control panel. The modern design and expanded color options support contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency.

System Sensor L-Series LED color LENS-R3 lenses come in four colors options: amber, blue, green, and red. The lenses are compatible with L-Series strobes including wall- or ceiling-mount. These color lenses must only be used with devices that are non-fire printed.

SpectrAlert® Advance horn strobes include a variety of features that increase application flexibility and simplify installation.

SS-Series detectors are intelligent (addressable) detectors with point ID capability that enables each detector address to be set with rotary address switches providing exact device locations. SS-Series detectors support current SK, LiteSpeed™ and SS Protocol systems. Refer to the Addressable Detector and Sounder Base Compatibility Chart or the Intelligent Control Panel SLC Wiring Manual for specific panel compatibility. The System Sensor SS-CO is an intelligent, addressable detector incorporating carbon monoxide (CO) detection principles that meet the UL 2075 standard for system-connected life safety carbon monoxide detection. As an addressable detector, additional modules are not needed for point ID which streamlines the installation process.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.