Shop VIGITRON | Brands We Sell

The NetMux™ Vi00103 port multiplexer enables connecting two IP/POE devices using a single Cat5/6 cable. It includes a port Combiner and a Port Splitter. The Vi00103RX combines two IP/PoE signals and transmits them through only one Cat5/6 cable. It has two built-in 10-inch Cat 5 pigtail cables to connect to the PoE switch. The Vi00103TX separates the combined signals and connects them to two ports of the PoE switch. It has two integrated LEDs to provide an indication of the PoE status for each port.

Vigitron’s OmniiCopper™ Vi27000 Ethernet and PoE transmitter bring new performance standards to the growing need for high-speed transmission of full bandwidth Ethernet and PoE power over extended distances of Single-Pair Wires. It operates in conjunction with single port Vi27001 or 4-port Vi27004 receivers over virtually any 2 conductor wires reliably. The Vi27000’s unique transmission technology eliminates the potential for cross-talk resulting in the perfect solution for bundled cable runs used in many elevators and building communication systems. Its PoE performance conforms to IEEE 802.3af/at standards.
Power can be provided from a PoE source or a DC power supply to the Vi27001 receiver at the control site to eliminate the need for local power supply at the camera location and increase system reliability.

Vigitron’s OmniiCopper™ Vi27000 Ethernet and PoE transmitter bring new performance standards to the growing need for high-speed transmission of full bandwidth Ethernet and PoE power over extended distances of Single-Pair Wires. It operates in conjunction with single port Vi27001 or 4-port Vi27004 receivers over virtually any 2 conductor wires reliably. The Vi27000’s unique transmission technology eliminates the potential for cross-talk resulting in the perfect solution for bundled cable runs used in many elevators and building communication systems. Its PoE performance conforms to IEEE 802.3af/at standards.
Power can be provided from a PoE source or a DC power supply to the Vi27001 receiver at the control site to eliminate the need for a local power supply at the camera location and increase system reliability.

Vigitron’s Vi2001 inline Ethernet surge protector is designed to provide protection where cable runs can be subject to electric spikes from outside environmental sources. These spikes can damage equipment. The Vi2001 minimizes this potential by its built-in ability to self-discharge these spikes.
Its small format and easy to install is compatible with any RJ45 connectors without the need for additional mounting or separate ground cable. Port data transfer is provided at 10/100/1000BaseT. The Vi2001 requires the shield of RJ45 connectors to be connected to the chassis ground.

Vigitron’s Mini MaxiiCopper™ Vi2401A is an Ethernet over Coax extender that brings new performance standards to the growing need for high-speed transmission of full bandwidth Ethernet and PoE over extended distances of coaxial cables. The compact mini extender is designed to easily fit in standard 4 × 4 and J-Boxes, providing weatherproofing and compliance with fire and other environmental requirements. Its unique Symmetric Bandwidth (SBW™) assures full bandwidth transmission is maintained over the entire operational distance for both uploads and downloads with Virtual Zero Packet Loss (VZPL™). Bandwidth assurance provides the ability to transmit multiple cameras on single camera runs with no information loss. Up to 36W Pass-Through PoE (PTP™) eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera.

The Vigitron MaxiiCopper™ Vi2301A UTP Ethernet extender extends data and PoE transmission beyond the standard 328 feet. It transmits over UTP cables up to 3,000 feet (914 meters). This makes it perfect for large areas like parking lots, campuses, and warehouses where extended network coverage is necessary.
Additionally, the Vi2301A is plug-and-play, eliminating the need for switch configurations or network programming. This greatly simplifies the installation process. It also supports Pass-Through PoE (PTP™), providing up to 74W of power through a single PoE source. This feature powers both transceivers and connected devices, such as cameras, without needing additional power at remote locations.

Vigitron’s Mini MaxiiCopper™ Vi2400A is an Ethernet over Coax extender that brings new performance standards to the growing need for high-speed transmission of full bandwidth Ethernet and PoE over extended distances of coaxial cables. The compact mini extender is designed to easily fit in standard 4 × 4 and J-Boxes, providing weatherproofing and compliance with fire and other environmental requirements. Its unique Symmetric Bandwidth (SBW™) assures full bandwidth transmission is maintained over the entire operational distance for both uploads and downloads with Virtual Zero Packet Loss (VZPL™). Bandwidth assurance provides the ability to transmit multiple cameras on single camera runs with no information loss. Up to 36W Pass-Through PoE (PTP™) eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera.

The Vi1120 is a 120W/ 56VDC power supply that is designed to meet the power requirements of CCTV products requiring high power levels. With Level 5 energy efficiency the Vi1120 provides high power, high-efficiency meeting Level V energy efficiency standards. Its Over Voltage Protection (OVP), Short Circuit Protection (SCP), and Over Current Protection (OCP) make it a very safe power supply. The Vi1120 intelligent system will evaluate fault conditions and once they are no longer present, will return to normal operations.
The Vi1120 operates at temperatures ranging from 0°C to +40°C with the ability to cold start under full load at 25°C. The Vi1120 is an ideal solution for powering CCTV systems.

The Vigitron MaxiiCopper™ Mini Vi2300A UTP Ethernet extender breaks the standard 328-foot Ethernet limit. It extends both data and PoE transmission up to 3,000 feet (914 meters) over UTP cables. Its compact design easily fits into small spaces and works well with weatherproof or plenum-rated enclosures.
Additionally, the Vi2300A is plug-and-play, so no switch configurations or network programming are required. This feature streamlines the installation process. Furthermore, its Pass-Through PoE (PTP™) delivers up to 74W of power. It supports IEEE 802.3af, at, and bt standards. A single PoE source powers both the transceivers and connected devices like cameras. Thus, there is no need for additional power at remote locations.

Vigitron’s Vi35136 is a next-generation enterprise-level fiber switch providing 24 MSA-compliant fiber ports with 4 combination fiber/copper ports. Focusing on the network and port security, Layer 2+ provides all of the features required for Vigitron’s Vi35136 is a next-generation enterprise-level hybrid copper and fiber core switch providing 24 MSA compliant fiber ports, 8 ports of10/100/1000Mbps UTP copper, and 4 ports of fiber 1G/2.5G/10G. Individual copper ports have built-in surge protection. Focusing on the network and port security, Layer 2+ provides all of the features required for network operation while each port is programmed with an individual MAC address, allowing for secured Layer 3 signal routing without any exposure to outside unsecured access. Jumbo frames can be programmed at 100Mbps for direct connection to the cameras and most IP security devices, reducing the potential for data loss while providing the ability to handle the largest megapixel cameras. Each port can