Shop Access Control Accessories

Use with AT, AX, DB, GT, IE, IXG, JF, JO, JP, JV, KB, MC, and TD Systems, as well as the IXG-2C7 tenant station

A light gray trim plate used when mounting the detector over a standard single-gang box.

The receiver can accept a maximum of 30 transmitters, and it is outfitted with an LED status indicator. The receiver also features a built-in five second relay on release and a cover designed to hide screw terminals for a clean installation.

With the use of a single device, wireless remote transmitters enable access control for up to three doors. The best choice for front desk/reception applications or challenging to wire settings. Built to operate with keypads, electric strikes, magnetic locks, gate operators, and door operators. Channel receiver, transmitter, mount, and keychain are all included in the kits.

Keri’s KPS-3 Power Supply provides an open frame power solution with an ultra compact footprint, providing your design with more space and efficiency. The Power Supply provides 12VDC @ 2.8A and has a 1.5A battery charging circuit. The supply has a perforated cover (for cooling) mounted in standard Keri enclosure (no enclosure option available). It works with the PXL-500, NXT, and NXT-MSC controllers. It supports a direct 100 VAC to 240 VAC input at 50 Hz and 60 Hz, no transformer required.

Surface-mounted stainless-steel cables, designed to conduct power to electric locks or access systems mounted in doors.

The Alarm Controls DL-2 is an access control door loop. Easy installation hardware and die-cast end caps are included. Abrasion-resistant steel coats the door loop.

Selective Door Release Adaptor

The Keri Systems NXT-RM3 Reader Interface Module is designed to make it easy to connect reader technologies with industry standard Wiegand output to NXT Controllers. It also allows connection of Keri MS Series Proximity Readers, most commonly used for legacy systems where PXL-500 Controllers are also in place being used with KC-10X, MT-10X, or PKT-10X credentials.

The NXT-RM3 securely plugs directly onto an NXT Controller or an NXT-4X4 or GIOX I/O Expansion Module with excellent mechanical and electrical integrity. The option to bring the reader terminations to the I/O modules provides substantial savings in wiring costs because door functions can be located closer to the reader/door, with only 4 wires required to be cabled to centrally located controllers.

Keri’s LAN-520 provides Ethernet connectivity for PXL and Entraguard controllers using a plug-in, Ethernet module to replace direct RS-232 serial connections or (now obsolete) modem connections for data transfer between doors.NET software and the controllers themselves. All PXL and Entraguard controllers can be connected, individually, via TCP/IP to take advantage of the existing Ethernet LAN/WAN.