Shop Hardware Accessories

MagDaddy utilizes Ultra-Strong magnets the same that are used in Aerospace, and Automotive Industries. These magnets for the first time ever are being used for applications in Wire/Cable management, and automotive fastener solutions. These magnets easily stick through oil, grease, paint, and dirt. After placing a MagDaddy Fastener onto a thick piece of steel, i.e. I-Beam, it appears as if it was welded on! MagDaddy products are used in all types of ways from holding down wires and door panels, to holding up signs and coats, as well Mag Daddy products continue to find themselves inside various OEM products.

Superior Pullout and Shear, Self-Drilling, Non-Conductive, No Drill Bit Needed, Sharp Profile Thread Cuts Deep

Easy Dispensing Lid, Resists Tangling When Dispensing, Can Be Left in Conduit for Reuse

MagDaddy utilizes Ultra-Strong magnets the same that are used in Aerospace, and Automotive Industries. These magnets for the first time ever are being used for applications in Wire/Cable management, and automotive fastener solutions. These magnets easily stick through oil, grease, paint, and dirt. After placing a MagDaddy Fastener onto a thick piece of steel, i.e. I-Beam, it appears as if it was welded on! MagDaddy products are used in all types of ways from holding down wires and door panels, to holding up signs and coats, as well Mag Daddy products continue to find themselves inside various OEM products.

Nelco Products offers the best selection in cable ties. These 7”standard cable ties come in a variety of colors including fluorescents, natural, and black. These standard cable tie wraps have an environmental operating temperature of -40°F to 185°F.

3/4” Diameter loop bridle ring with 10-24 machine thread secured to a permanent magnet. Used to support communication cable & other non sensitive cables and wires.

Metallics Flat head wood deck screw measuring 1-1/4-Inch x size 6 Dia, has size 2 Phillips drive. This screw in yellow zinc chromate finish, features hardened steel construction.
Suitable for all-weather wood applications
Features flat type head
Zinc chromate finish provides protection against corrosion

The RD3 Kit is suitable for use in solid/hollow wall, concrete, block, or brick applications. When used in hollow walls, such as drywall or plywood, the wings will splay out to provide a more secure installation and higher pull-out load. The anchor has a lip to prevent falling into deep holes or hollow walls. For hard wall applications, use the size of the anchor to determine hole size for installation. For drywall or soft applications it is recommended to use the smallest hole that will enable a tight fit of the anchor. These anchors are not recommended for use in overhead applications or where holding values are critical.

The magnets used in these MagDaddys are very strong and will hold up practically any cable bundle you attach along a wall or even upside down! Even with such a strong hold, they can be pulled off with a little extra force and moved or stored away for multiple uses. The ideal solution for any warehouse, garage, automobile or any where with a steel surface.