Shop Control Panels

Simple to use, Self-Contained, Scalable Access Control Solution. Each controller functions as a Server, expansion panel or elevator module. Ready out of the box, browser-managed.

Simple to use, Self-Contained, Scalable Access Control Solution. Each controller functions as a Server, expansion panel or elevator module. Ready out of the box, browser-managed.

Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support for up to three Paxton10 connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers.
The Paxton10 door controller is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure.
PoE+ – The Paxton10 PoE+ Door Controller is equipped with a built-in PoE+ splitter, with which it is possible to supply the door controller and door lock via PoE+, so no 230v connection is required at the door. We recommend using a TCP/IP network switch with PoE+ output. It is also possible to place a backup battery in the Paxton10 PoE+ Door Controller, if you want an extra backup in case of power failure, we recommend placing the switch behind a UPS.
The door controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE.
An intruder alarm can be integrated u

The AC-825IP is a state-of-the-art 4-door networked access controller and is the backbone of a medium-scale to high-scale security system. The controller comes with one onboard expansion slot and can be further expanded by connecting up to 12 expansion boards via OSDP. Using only D-805 door expansion boards, a single AC-825IP can handle up to 58 doors and 60,000 users. Driven by AxTraxNG Rosslares powerful, flexible, and easy-to-use software the system provides an ideal modular and expandable solution for commercial and institutional needs.

Net2 is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users’ access. Each control unit is part of a network but can run independently making its own decisions and remembering events.
The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control unit also has an RS485 connection. This means it can be connected to other Net2 plus or Net2 classic control units using a dedicated CAT5 cable.

The CIM is a communication control module designed to use a CAN Bus communication network. Keyscan’s CIM provides optimized server to access control unit (ACU) communication. The Communication Interlink Module creates a new inter-panel ACU to ACU communication network that provides global communication functions including anti-passback, global input/output and global time zones. The CIM includes an impressive host of new features including ground loop protection, enhanced diagnostics, improved speed and unprecedented reliability.

The GEM-ACM1D is an accessory that adds integrated access control to the burglary alarm functions of the GEMX255 control panel. It provides controlled access to a door by releasing a locking device (such as a magnetic lock or electric strike) when the proper credential is presented to the card reader. Access control is integrated with the burglary functions of the GEM-X255. It can be used to arm and disarm the system, annunciate and report alarms and troubles, and monitor the access door without the need for additional contacts.

Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support up to three Paxton10 connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers.
The Paxton10 Door Controller is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure.
This controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE.
An intruder alarm can be integrated using the Paxton10 alarm connector (010-203).
Power over Ethernet (PoE) and PCB only (with or without plastic enclosure) options also available.

Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support for up to three Paxton10 Wireless Connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers.
The Paxton10 door controller is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure.
PoE+ – The Paxton10 PoE+ Door Controller is equipped with a built-in PoE+ splitter, with which it is possible to supply the door controller and door lock via PoE+, so no 230v connection is required at the door. We recommend using a TCP/IP network switch with PoE+ output. It is also possible to place a backup battery in the Paxton10 PoE+ Door Controller, if you want an extra backup in case of power failure, we recommend placing the switch behind a UPS.
The door controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE.
An intruder alarm can be int

The GEM-2D is a module that connects to the GEMACM1D, an accessory that adds integrated access control to the burglary alarm functions of the GEM-X255 control panel. The GEM-ACM1D provides controlled access to a door by releasing a locking device (such as a magnetic lock or electric strike) when the proper credential is presented to the card reader. The GEM-2D allows the GEM-ACM1D to independently control a second access relay using a separate card reader.

Two readers can be used to control one door. Each reader can be programmed to allow its own independent access schedules to control both exit and entry permissions for a single door. The GEM-2D is basically identical to the GEM-ACM1D, except that the GEM-2D uses separately wired card readers, door contacts and locking device relays that all function in the same manner as the GEM-ACM1D.