Shop Intrusion Accessories

The ELK-SWB14 is a universal structured wiring box featuring a pattern of hole-slot-hole that allows it to accommodate accessories, circuit boards, shelves, brackets, and wiring modules from many different manufacturers. It is designed to be surface mounted but can be flush mounted with the addition of an optional ELK-SWFD14 Flush Mount Door.

3” Adapter plate for mounting components, boards and devices into ELK Structured Wiring Enclosures

Convenient multi-purpose adapter plate accommodates many M1 expanders and peripherals. This versatile adapter also provide mounting for a variety of ELK components including relays, siren drivers, power supplies and more! For use with ELK structured wiring enclosures.

The ELK-M1BBK2 is an optional back box kit for that allows the ELK-M1KP2 keypad to be flush (recess) mounted.

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply.
In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent “deep discharging” of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.

Retrofitting keypads an other system interfaces can be frustrating, especially when it requires patching a wall. The ELK-CPL Universal Cover Plate solves this problem for faster installations and a clean finished look.

The ELK-960 Delay Timer is designed to be an economical and flexible solution for any general-purpose timer application. The unit can be configured for use on 12 to 24V systems, with positive or negative trigger logic. Positive triggers can be as low as 4.5V. Setup is quick and easy with thumbwheel adjustment between 1 and 60 seconds. A quick jumper setting converts the time from seconds to minutes. The Timer can be configured to activate once for each trigger, or free-run as soon as power is applied. Relay can be configured to be normally on or normally off.

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings. The ELK-950 is compact and easy to install and features high quality, clearly labeled screw terminals, 8 pin modular phone connector, built-in tamper loop, and automatic shorting pins for cord removal.

The ELK-M1XSP is a “3 in 1” product for additional serial ports and for integration with lighting systems and thermostats. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1 Gold and M1EZ8 support up to 7 M1XSPs. The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.

Pack of 100 self adhesive test data labels for use with the Battery LifeTester™