Shop Intrusion Accessories

For attaching M1 expansion boards and other manufacturer’s boards to the ELK-SWP3 and ELK-SWP4 Plates.

The IQP4STAND-BLK is a black-color table or desk mount stand and is compatible with the IQ Panel 4 Controller. With the IQ Stand, the user can conveniently place the IQ Panel 4 touchscreen on a desk, and control either home or business without having to leave the chair.

Increase the back-up battery capacity of M1 control by installing dual back-up batteries. Replaces factory battery wires.

The ELK-M1EZ8MSI Main Serial Port Interface allows direct RS-232 Serial Communications to an M1EZ8 Control for Upload/Download programming, and for interfacing with other Computer type devices. Also required when adding the M1XEP Ethernet Port to an M1EZ8 Control. The speed of this port is software selectable from 300 to 115,200 baud.

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.

Daughter card that allows Zigbee (2.4GHz) device support on IQ Panel 2,4 and IQ4 Hub

The Alula RE934ZT is a combination Z-Wave expansion card and translator designed for the Connect+ control panel. This combination board can be placed in expansion slot 3 of the Connect+ panel. The RE934ZT Z-Wave/Translator combination expansion card solves compatibility issues with existing sensors and fulfills the DIYer’s desire for home automation services. Compatible with tested and approved Z-Wave enabled devices, this expansion board provides convenience for do-it-yourselfer and adds appealing sustainability options for their homes. The RE934ZT reduces costs by not having to replace the original sensors while providing home automation services that are popular in today’s IOT market.

This two pin cable is used to connect a 26 bit Wiegand reader (such as the ELK-106055) to the ELK-M1KP2 or M1KP3 Keypad.

The DSC PC5108 is an 8-zone expansion module to allow for up to eight additional sensors and detectors on a hardwired DSC alarm panel. PC5108 is compatible with PC1616, PC1832, and PC1864.

1K 1/2W EOL RES 8/PKG. The P105F EOL resistor is a 1 kO, 0.5 W resistor with 18 AWG (1.2 mm), violet wire leads (each approximately 15 cm [6 in.] long). It is used as an end-of-line resistor for loop supervision and is supplied in packages of eight.