Shop Motion Sensors

The DSC Bravo 5GB is a Bravo 5 360 degree ceiling mounted motion that has a DSC Acuity 100 glassbreak sensor built into it. This combo unit offers a great cost savings of having both built into one unit if you are looking at using both types of devices on your alarm system.

The Blue Line Gen2 PIR Motion Detectors Provides PIR, 12 m x 12 m (40 ft x 40 ft) coverage.

The CX-702 is designed to give extremely stable long-range detection performance in a variety of internal commercial and industrial applications. With patented Multi-Focus technology, sensitivity is maintained through the entire coverage area, even in high temperature areas or in applications with low temperature contrast. Combined with Double Conductive Shielding and Temperature Compensation, a high level of false alarm protection is guaranteed. In addition, a unique feature to the CX-702 is the ability to choose between a 70’ x 70’ pattern and a 150’ x 8’ with a simple flip of the lens.

The DT8000 motion detectors from Resideo will maximize intruder detection while diminishing false alarms. These motion detectors mount on walls or in corners, with heights from 6 ft. 9 in. to 8 ft. 9 in. The DT8000 works with the SMB10 family of swivel brackets.The DT8035V is a high performance small form factor motion detector that offers a trouble-free, out of the box simple installation process to reduce time. With the passive infrared DT8035V optimum performance is achieved using custom developed extended range Fresnel optics, look down, cover and wall tamper, and selectable pet immunity. Leading edge sensing technologies and a wide range of models to suit the requirements of most applications, the Honeywell DT8035V motion detector will maximize intruder detection while diminishing false alarms.

The Honeywell DT8050V is a hardwired DUAL-TEC motion detector protects an area of 53’ x 72’ and provides immunity to pets up to 100 lbs.

The DT8050V is a high performance small form factor motion detector that offers a trouble-free, out of the box emperience to simply the installation process and reduce time. With the passive infrared DT8050V optimum performance is achieved using custom developed extended range Fresnel optics, look down, cover and wall tamper, and selectable pet immunity. Leading edge sensing technologies and a wide range of models to suit the requirements of most applications, the Honeywell DT8050V motion detector will maximize intruder detection while diminishing false alarms.

The MX-40PI combines state of the art microwave and PIR technologies in attractive, easy-to-install units and underlines Optex’s absolute commitment to provide detectors with unprecedented reliability and detection performance at very reasonable prices. Incorporating Anti-Crosstalk technology, which prevents false alarms caused by microwave interference when several detectors are operating in the same area, and also Quad Zone Logic, which discriminates between humans and other sources of infrared, the MX-40PI is unrivaled in its performance.

Provides a 21 m (70 ft) panoramic coverage pattern and can be used on ceilings as high as 7.6 m (25 ft).

Sensor data fusion technology is a unique feature that uses a sophisticated software algorithm to gather signals from five sensors: two pyroelectric sensors, a range adaptive radar sensor, a room temperature sensor, and a white light level sensor. The microcontroller analyzes and compares the sensor data to make the most intelligent alarm decisions in the security industry.

The EX-35T breaks the mold of low cost, quality efficient detectors. You can select between precise wide angle and long range coverage, and also multi-level or pet alley detection patterns. By incorporating our patented multi-focus technology into the spherically designed lens, the EX-35 has successfully eliminated sensitivity problems caused by changes in detection patterns.

OPTEX expands on its industry leading outdoor battery-powered intrusion line by adding the quad beam SL-350QFR, a 350 ft. battery-powered photoelectric detector requiring no trenching or wiring. Because of this, Integrators and Dealers can offer a significant cost saving alternative to traditional hardwired systems, while End Users will benefit from less downtime to business operations during install. The iSeries SL-350QFR includes a multi functional backbox that accepts most manufacturers wireless transmitters, and comes with four batteries per set, with the option of expanding to eight for up to 10 years of battery life. In addition, the SL-350QFR is compatible with the AX-TW200 line of beam towers for a clean, concealed, wireless mounting option.The SL-350QFR is the perfect solution for perimeter protection where labor costs or trenching is an issue.