Shop Wireless

The IQ Pendant-S is a wireless handheld device that when pressed sends a wireless signal to the alarm panel. Using our proprietary S-line encryption technology, it encrypts signals sent to the IQ Panel while still providing backwards compatibility for legacy 319.5 systems.

The 2GIG-CO8-345 is a wireless non-encrypted carbon monoxide detector that is designed for indoor use, to detect the presence of CO gas. If deadly CO gas is detected, the 2GIG-CO8-345 communicates an alarm initiating signal to your 2GIG GC2 or GC3 alarm control panel. The carbon monoxide detector is battery operated with a low battery sensor, and an end-of-life notification. Likewise, this device also contains an 85 dBA sounder, as well as a hush/test button for trouble shooting purposes.

The 2GIG-CO8-345 wireless carbon monoxide alarm is a 3V battery powered wireless detector intended for use with wireless alarm systems. The detector consists of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter. The 2GIG-CO8-345 communicates with the control panel and can send alarm, tamper and battery condition messages to the system’s receiver.

The Alula RE214 Honeywell Compatible Wireless Smoke Detector is a highly reliable smoke detector with a photoelectric detection element and built-in temporal 3 sounder. Long-range transmitter and a detection element that is UL217 certified.

The GEM-HEAT is a high-quality 135F (57C) Fixed temperature detector with Rate of Rise. It is compatible with the NAPCO Express and Gemini series GEM-RECV Series supervised security receivers.. ??The GEM-HEAT incorporates circuitry which will transmit an alarm signal upon an alarm condition, generate an hourly supervisory test signal to the receiver and also monitor and annunciate low battery.

The Wireless Touch Screen Keypad (2GIG-TS2-E) is a wall-mounted, full-color, touch screen interface that provides many of the same easy-to-use keypad functions available on the control panel. It is designed for indoor use only and gives users the ability to control lights, thermostats, and door locks, as well as to view the status of every sensor zone.
When the 900 MHz Transceiver Module (2GIG-XCVR2-345 / 2GIG-XCVR2E-345) is installed in the control panel, the system can be programmed to communicate with up to four (4) Wireless Touch Screen Keypads.

96 Zone wireless reciever module for Napco’s GEM-Series control panels.

Wireless Motion Sensor with Pet Immunity

The PG9936H is a wireless heat detector with a fixed temperature and rate of rise heat sensor and an internal piezoelectric alarm. Temperatures exceeding 57°C (135°F) trigger the built-in 85 dB alarm, flash the LED light, and activate IQ Panel notifications and siren.
Works with: IQ Panel 2+, IQ Panel 4, IQ4 Hub, IQ4 NS, PowerSeries Neo, PowerSeries Pro.

Colorless, tasteless, odorless but deadly, carbon monoxide (CO) is impossible to detect without a warning device. The WS4933 provides frontline protection against the silent threat of carbon monoxide poisoning. Designed to provide reliable carbon monoxide detection, the WS4933 is a low profile Wireless Carbon Monoxide Detector that is ideal for difficult-to-wire residential or commercial applications. The Wireless Carbon Monoxide Detector is ideal for residential or commercial applications where running wire to a CO detector is either difficult or impossible. With no wires to run, installers are able to save time and move more quickly through the installation process. All it requires for installation is a screwdriver and any compatible DSC control panel.

The Alula RE218 Honeywell Compatible Wireless Flood & Temp Sensor is an integrated environmental sensor. This sensor is designed to detect flood conditions and extreme temperatures and can be configured to report custom high and low-temperature trip points. Heat alarms when over 100 degrees F and Freeze alarms when under 45 degrees F.