Shop Addressable Devices

The Honeywell BG-12 series manual fire alarm pull stations are cost-effective, feature-packed, non-coded manual fire alarm pull stations. It provides Fire-Lite Alarm Control Panels (FACPs), as well as other manufacturers’ controls, with a manual alarm initiating input signal. Its innovative design, durable construction, and multiple mounting options make it simple to install, maintain, and operate. It has aesthetically pleasing, highly visible design and color. It has attractive contoured shape and light textured finish. Its PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated. The word “ACTIVATED” appears on top of the handle in bright yellow, further indicating operation of the station.

White, low-profile intelligent photoelectric sensor, LiteSpeed only

Use to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel.

The CRF-300 may be programmed to operate dry contacts for door holders, Air Handling Unit shutdown, etc., and to reset four-wire smoke detector power.

The Silent Knight® SK-PHOTO Series features a modern design and expanded color options support a variety of contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency.

The MMF-300(A) Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It pro- vides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The MMF-300(A) can be used to replace M300 modules in existing systems.

SK-PULL intelligent pull stations are for use with Silent Knight® Series fire control panels (FACPs).

The SK-RELAY contacts can be used for virtually any normally open or normally closed application. Each SK-RELAY is programmed with a unique signaling line circuit (SLC) loop address. When an event occurs that controls the SK-RELAY, the relay is triggered by the FACP.

The SK-MINIMON is compatible with the following Honeywell Silent Knight fire alarm control panels:

• 6820: Addressable fire alarm control panel
• 6820EVS: Addressable fire alarm control panel with an emergency voice system.
• 6808: Addressable fire alarm control panel
• 6700: Addressable fire alarm control panel
• 5700: Addressable fire alarm control panel
• 5808: Addressable fire alarm control panel
• 5820XL: Addressable fire alarm control panel
• 5820XL-EVS: Addressable fire alarm control panel with an emergency voice system

The SK-MONITOR is compatible with the following Honeywell Silent Knight fire alarm control panels:

• 6820: Addressable fire alarm control panel
• 6820EVS: Addressable fire alarm control panel with an emergency mass notification system.
• 6808: Addressable fire alarm control panel
• 6700: Addressable fire alarm control panel
• 5700: Addressable fire alarm control panel
• 5808: Addressable fire alarm control panel
• 5820XL: Addressable fire alarm control panel
• 5820XL-EVS: Addressable fire alarm control panel with an emergency mass notification system