Shop Control

Model 5496 intelligent power modules are cost-effective power supplies, delivering 6A of notification appliance circuit power and built-in synchronization for appliances from System Sensor®, Gentex®, AMSECO®, and Wheelock™.

6 programmable Initiating Device Circuits/System is expandable to 192 input circuits using the IDC-6 expansion module/5.0 amp power Supply/4 Notification Circuit rated at 3.0 Amps/4 × 20 LCD display with system LeDs for clear system status

The RA-6075 is a LCD remote annunciator for the PFC-6075 and PFC-6030 addressable fire control panel. The RA-6075 communicates using a RS-485 connection to the main panel providing common indication of Alarms, Supervisory, Trouble and other system status and control functions.
The RA-6075 features a 32 character, 16×2 LCD display with LED’s for Power, Alarm, Supervisory, Trouble, and Silenced conditions. It can be mounted on a single gang electrical box or a four square electrical box. The annunciator is enclosed in a sheet metal enclosure and has a Potter lock securing the keypad.

005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.

The AFC-100 includes two Notification Appliance Circuits (NACs), two Input/Output (I/O) circuits, and a 5 Amp power source. The I/Os are individually rated for 1 Amp, whereas the NACs are each rated for 3 Amps. Each output has a power restriction and is regulated. Additionally, each output can be individually programmed and can be set to produce a steady signal, synchronize strobes, have constant power, power door holders, or release.

The Initiating Device Circuit Expander (IDC-6) provides an additional 6 inputs per module. The panel supports up to thirty-one (31) IDC-6 modules. The circuits are power-limited and supervised. All inputs are suitable to monitor 2-wire smoke detectors. Smoke detectors shall be installed in compliance with NFPA 72. Inputs can also be used for automatic, manual, waterflow or supervisory service. The IDC-6 communicates via the PLink communication bus. The IDC-6 can be mounted in either the control panel cabinet, the intelligent power supply, AE-2, AE-8 or the AE-14 expander cabinet. Each card is mounted to the exclusive Stacker Bracket for secure and accessible mounting.

The Signaling Line Circuit Expander PAD100-SLCE allows up to thirty one additional loops. Each loop adds 127 addressable sensors or modules in any combination. The PAD100-SLCE may be configured for Class A or Class B wiring without the need for additional modules. The PAD100-SLCE communicates with the control panel via the Potter P-Link communication bus. The loop adder is mounted in either the control panel cabinet, the intelligent power supply, AE-2, AE-8 or the AE-14 expander cabinet. Each card is mounted to the exclusive Stacker Bracket for secure and accessible mounting.

The 6815 is a signaling line circuit (SLC) expander for use with Honeywell Silent Knight 6820 or 6820EVS fire alarm control panels (FACPs) using System Sensor® protocol.

The PFC-6006 is a listed small conventional fire system ideally suited to monitor a small fire system such as a fire sprinkler system. The first input is selectable as a Class A or Class B water flow input and the other five zones are selectable from a menu of options including two-wire smoke detection. The panel has a 1.0 amp power supply that powers the panel, charges the batteries and supplies 0.5 amps to a notification appliance circuit and 0.5 amps of auxiliary power. The auxiliary power is programmable as constant or resettable.
The control panel is in a metal cabinet with a key lock and lexan window for viewing the system status. The printed circuit assembly is mounted for quick removal and installation to allow the cabinet to be installed with minimal effort. The cabinet houses up to two 12VDC, 18 AH batteries.
The display is a thirty-two (32) character LCD with system status LEDs. The system status is clearly displayed and the panel includes a history buffer for past events. T

5895XL intelligent power modules are 6A notification power expanders that provide their own AC power connection, battery charging circuit, and backup battery for use with Silent Knight® addressable fire alarm control panels.