Shop Detection Devices

The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.

The i4 module allows up to 12 i4 Series or compatible i3 Series smoke detector models to be integrated into a fire alarm panel using only 2 to 3 zones: a smoke zone, a CO zone and an optional trouble zone. Detectors sound Temp 3 for smoke and Temp 4 for CO events. The i4 module can be used to alarm all sounders in compatible detectors for smoke and CO events. When one detector detects smoke or CO and goes into alarm, all connected detectors alarm, offering the highest level of warning to the homeowner. The i4 Series Interface Module mounts to a 411/16-inch square back box for quick and easy installation. Terminal blocks with durable SEMS screws ensure a reliable connection. It also has pre-drilled holes for easy mounting inside a metal enclosure.

The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.

BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.

Includes 135°F fixed thermal sensor & built-in sounder. Plug-in design with mounting base included.

i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. This device is available in two models; the OSYSU-1, containing one set of SPDT (Form C) contacts and the OSYSU-2, containing two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2” to 12” (50mm to 300mm). They will mount on some valves as small as “ (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device and should be left with the building owner or responsible party. Replacement or additional cover screws and hex keys are available.

The Macurco GD-2A is a combustible gas detector that connects to a Fire Alarm/Burglary Control Panel and monitors for hazardous methane and propane gas in homes and office buildings.??Easy to install and operate, the GD-2A has a solid state electronic sensor that requires no maintenance. 12 or 24 VDC control panels with backup batteries can provide backup battery power to the detector as well. An LED indicator alerts users to detector status, including arm and alarm conditions. The unit can be surface mounted or installed over an electrical box.??The GD-2A is a great detector for residences, retail stores, office buildings, and institutional buildings.

BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.

The Macurco CM-E1 is a reliable, lightweight, and aesthetically pleasing gas detector made to keep you and the people you care about safe from harmful gases in residential and light commercial applications. It is a low-voltage gas detector designed for use with fire and security systems. The CM-E1 is UL 2075 Listed for use in residential and commercial applications and is also approved by the California State Fire Marshal.