Return to previous page

ALTRONIX EFLOW104NB, PS, 1 OUT, 24VDC @ 10A, AUX OUT, FAI, LINQ2 READY, BOARD

TWO (2) OUTPUT PWR SUPPLY/CHARGER W/FIRE

eFlow104NB

Item #: AL-EFLOW104NB

Product Info

Alt Part #: 78223994985, ALEFLOW104NB

Brand: ALTRONIX CORPORATION

Supplier Part #: EFLOW104NB

TWO (2) OUTPUT POWER SUPPLY/CHARGER WITH FIRE ALARM DISCONNECT – 24VDC AT 10 AMP MAX ADDITIONAL SEPARATE 1 AMP AUX. CLASS 2 RATED POWER-LIMITED OUTPUT AC & BATTERY MONITORING LOW POWER SHUTDOWN OVER VOLTAGE PROTECTION (OVP) 115VAC INPUT UL RECOGNIZ

Altronix eFlow104NB UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Input

Voltage: 120VAC 60Hz, 4.5A max.
Input Fuse: 6.3A/250V
Removable AC input terminal block to facilitate installation and wiring.

Output

24VDC output.
10A continuous supply current.
Aux. power-limited output rated @ 1A (unswitched).
Over Voltage Protection.
Filtered and electronically regulated outputs.

Battery Charging

Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Transfer to stand-by battery power is instantaneous with no interruption.
(Batteries are sold separately).

Fire Alarm Disconnect

Supervised Fire Alarm disconnect (latching or non latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.

Supervision

AC fail supervision (form “C” contacts).
Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
Battery fail & presence supervision (form “C” contacts).
Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.

Electrical
Temperature: