ALTRONIX T2KK38D, 8-DOOR, KEYSCAN ACCESS/PWR INTEGRATION KIT, Trove2KA2 W/AL600ULXB, ACM8CB, T16100
Item #:
AL-T2KK38D
Product Info
ALT2KK38D
ALTRONIX CORPORATION
T2KK38D
TROVE2KA2/8DR/6A/ULXB/PTC
Altronix T2KK38D kit consists of Trove2 enclosure, TKA2 Keyscan/Altronix backplane with one (1) 24VDC @ 6A power supply/charger, one (1) PTC access power controller, and one (1) 16VAC transformer. ?This kit also accommodate various combinations of Keyscan boards for up to eight (8) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
AL600ULXB Power Supply/Charger
Input
- Voltage: 115VAC, 60Hz, 3.5A max.
- Fusing: 5A / 250V.
Output - Voltage: 12VDC or 24VDC selectable.
- Current: 6A @ 12VDC or 24VDC continuous max.
- Other: Overvoltage protection. Filtered and regulated.
Battery Charging - Capacity: 7AH / 12VDC (up to 2 within enclosure); 40 AH / 65 AH (requires separate enclosure).
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
(Batteries are sold separately).
Supervision - AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
Indicators LED - Input: 115VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
T16100 Transformer
Input
- Voltage: 115VAC, 50/60Hz, 1A.
Output - Voltage: 16VAC/100VA. 6.25A supply current.
ACM8CB Access Power Controller
Input
- Voltage: 24VDC from AL600ULXB.
Input Fuse: 10A / 250V.
Outputs - Voltage: 24VDC.
- Eight (8) independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above. - Output PTCs: 2.5A.
Indicators (LED) - Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: – 20° C to 70° C ( – 4° F to 158° F).
- Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.): - 111 BTU/Hr.
Enclosure:
- Wall mount enclosure for indoor use.
- Accommodates up to four (4) 12VDC/12AH Batteries.
- Dimensions 21.5“W x 27.25“H x 6.5“D (546.1 mm W x 692.15 mm H x 165.1 mm D).
- 3/4” and 1” combination knockouts.
Weights (approximate): - Product Weight: 40.9 Lbs. (18.55 kg).
- Shipping Weight: 46.9 Lbs. (21.27 kg).
