ALTRONIX T2VK7F8 8-Door Altronix/HID VertX® Access and Power Integration Kit - Trove2V2 with eFlow104NB, ACM8, VR6,PDS8

T2VK7F8

Item #: AL-T2VK7F8

Product Info

Alt Part #: ALT2VK7F8

Brand: ALTRONIX CORPORATION

Supplier Part #: T2VK7F8

TROVE2V2 8-DR 10A FUSE

Altronix T2VK7F8 kit consists of Trove2 enclosure, TV2 VertX®/Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) fused access power controller, one (1) voltage regulator and one (1) dual input fused power distribution module. ?This kit also accommodates up to four (4) HID VertX® modules for up to eight (8) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

eFlow104NB Power Supply/Charger
Input

Voltage: 120VAC, 60Hz, 4.5A max.
Main Fuse: 6.5A / 250V.
Outputs
Voltage: 24VDC.
Current: 10A continuous.
Auxiliary: Class 2 power-limited @ 1A (unswitched).
Other: Overvoltage protection. Filtered and regulated.
Battery Charging
Capacity: 12VDC/12AH (2 within enclosure); 40AH/65AH (requires separate enclosure)
Type: Sealed lead acid or gel type
Failover: Upon AC loss, instantaneous
(Batteries are sold separately).

Fire Alarm Disconnect

Supervised: Latching or non-latching.
EOL: 10K Resistor.
Supervision
AC Failure: Form “C” contacts.
Battery: Form “C” contacts.
Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.
Indicators LED
Input: 120VAC is present.
DC Output: Powered.

PDS8 Dual Input Power Distribution Module
Input

Voltage: 24VDC from eFlow6NB and 12VDC from VR6.
Main Fuse: 10A / 32V.
Outputs
Voltage: 12 and/or 24VDC.
Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Output Fuses: 3A / 32V.
Indicators (LED)
DC Output: Eight (8) individual output LEDs.
Green: 12VDC
Red: 24VDC.

VR6 Voltage Regulator
Input

Voltage: 24VDC from eFlow6NB.
Output
Voltage: 12VDC.
Current: 6A continuous.
Other: Surge suppression.
Indicators LED
Input: 24VDC is present.
Output: Powered.

ACM8 Access Power Controller
Input

Voltage: 24VDC from eFlow104NB.
Main Fuse: 10A / 250V.
Outputs
Voltage: 24VDC.
Eight (8) independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above.
Output Fuses: 3.5A / 250V.
Indicators (LED)
Red LEDs: Outputs are triggered (relays energized).
Green LED: FACP disconnect is triggered.