Eaton ELSTR, ELUXA Wall Fire Alarm Strobe Light 24V
Item #:
CWL-ELSTR
Product Info
78669700968, CWLELSTR
Eaton
ELSTR
ELUXA LED STR RED WALL 24V 15/30/75/110/135/185 FIRE
Eaton Eluxa strobe, LED, wall, red, FIRE, clear lens, 15/30/75/110/135/185 cd, 24V, indoor
FEATURES:
- UL/ULC listed as compatible with all Fire Alarm Control Panels (FACP) and accessories that have been determined to be compatible with Wheelock RSS strobe-based products and Exceder LED3
- Ability to mix LED and xenon strobes in the same field of view
- Meets stringent synchronizing standards for strobes with Wheelock’s DSM Sync Modules, PS Power Supplies or SAFEPATH products
- LED technology provides industry’s lowest current draw for a combined high and low candela device
- Fewer power supplies required, smaller wire gage, reduced wire runs
- One of the smallest, most compact single-gang designs
- Sleek, modern aesthetics with no visible mounting screws
6 Field selectable settings: Wall: 15, 30, 75, 110, 135, 185 cd - Mounting plate included. Convenient capture hinge allows installers to easily hold the device while fastening the single-mount screw in place
- Pre-wire/pre-test capability to check for wiring and ground faults prior to appliance installation
- Finger slide switches—No tools needed for setting changes
- IN/OUT screw terminals using #12 to #18 AWG wires
Compliance & approvals
- NFPA 72 2016 (meets maximum light pulse duration of 20 ms)
- UL 1971, UL 1638, UL 464; ULC-S525, ULC-S526
- California State Fire Marshal (CSFM)
- ADA/NFPA/ANSI/OSHA
Export To PDF